DDR2 SDRAM is a double data rate synchronous dynamic random access memory interface. It supersedes the original DDR SDRAM specification and has itself been superseded by DDR3 SDRAM. DDR2 is neither forward nor backward compatible with either DDR or DDR3, meaning that DDR2 memory modules will not work in DDR or DDR3 equipped motherboards and vice versa.
In addition to double pumping the data bus as in DDR SDRAM (transferring data on the rising and falling edges of the bus clock signal), DDR2 allows higher bus speed and requires lower power by running the internal clock at half the speed of the data bus. The two factors combine to require a total of four data transfers per internal clock cycle. With data being transferred 64 bits at a time, DDR2 SDRAM gives a transfer rate of (memory clock rate) × 2 (for bus clock multiplier) × 2 (for dual rate) × 64 (number of bits transferred) / 8 (number of bits/byte). Thus with a memory clock frequency of 100w MHz, DDR2 SDRAM gives a maximum transfer rate of 3200 MB/s.
Since the DDR2 internal clock runs at half the DDR external clock rate, DDR2 memory operating at the same external data bus clock rate as DDR results in DDR2 being able to provide the same bandwidth but with higher latency. Consequently, DDR2 RAM possesses inferior performance. Alternatively, DDR2 memory operating at twice the external data bus clock rate as DDR may provide twice the bandwidth with the same latency. The best-rated DDR2 memory modules are at least twice as fast as the best-rated DDR memory modules.
Like all SDRAM implementations, DDR2 stores memory in memory cells that are activated with the use of a clock signal to synchronize their operation with an external data bus. Like DDR before it, the DDR2 I/O buffer transfers data both on the rising and falling edges of the clock signal (a technique called double pumping ). The key difference between DDR and DDR2 is that for DDR2 the memory cells are clocked at 1 quarter (rather than half) the rate of the bus. This requires a 4-bit-deep prefetch queue, but, without changing the memory cells themselves, DDR2 can effectively operate at twice the bus speed of DDR.
