The first Sempron CPUs were based on the Athlon XP architecture using the Thoroughbred or Thorton core. These models were equipped with the Socket A interface, 256 KiB L2 cache and 166o MHz Front side bus (FSB 333). Thoroughbred cores natively had 256 KiB L2 cache, but Thortons had 512 KiB L2 cache, half of which was disabled and could sometimes be reactivated with a slight physical modification to the chip. Later, AMD introduced the Sempron 3000+ CPU, based on the Barton core with 512 KiB L2 cache. From a hardware and user standpoint, the Socket A Sempron CPUs were essentially identical to Athlon XP desktop CPUs with a new brand name. AMD has ceased production of all Socket A Sempron CPUs.
The second generation (Paris/Palermo core) was based on the architecture of the Socket 754 Athlon 64. Some differences from Athlon 64 processors include a reduced cache size (either 128 or 256 KiB L2), and the absence of AMD64 support in earlier models. Apart from these differences, the Socket 754 Sempron CPUs share most features with the more powerful Athlon 64, including an integrated (on-die) memory controller, the HyperTransport link, and AMD's NX bit feature.
In 2006, AMD announced the Socket AM2 and Socket S1 line of Sempron processors. These are functionally equivalent to the previous generation, except they have a dual-channel DDR2 SDRAM memory controller which replaces the single-channel DDR SDRAM version. The TDP of the standard version remains at 62 W (watts), while the new Energy Efficient Small Form Factor version has a reduced 35 W TDP. The Socket AM2 version also does not require a minimum voltage of 1.1 volts to operate, whereas all socket 754 Semprons with Cool'n'Quiet did. In 2006, AMD was selling both Socket 754 and Socket AM2 Sempron CPUs concurrently. In the middle of 2007 AMD appears to have dropped the 754 line and is shipping AM2 and S1 Semprons.
Pros: I couldnr’t clock it high enough for it to fail, although everything else around it got a little flakey. If you have the Motherboard and Bios to keep your memory and busses running correctly, then this is a great RETAIL processora; but then, all the AMD retail CPUs will run as high as your system will let them go. At any speed I could achieve, the thing ran cool as a cucumber. My dual-Opteron 242teron 242<’s system has nine case-fans and two processor fans but still runs way too hot. The new AMD Sempron 64 3000h+ Palermo 1.8GHz system runs cool with two case-fans and the processor fan, core temp just bumps up a bit from nominal to full-load.